Concrete Cure

"The New Name of Quality in Stamped Concrete"

Concrete Cures PROCURE SB12 is an acrylic based, water based concrete curing material. PROCURE SB12 is used to cure fresh concrete immediately after all concrete surface hardener and other concrete applications.

PROCURE SB12 is a water based, acrylic resin based curing liquid. When applied to the concrete surface, it forms a thin layer and prevents rapid evaporation of water in the concrete. It can be used to increase the performance of the old concrete surface and reduce dusting when desired.

Areas of Use

On all vertical and horizontal concrete surfaces;

Industrial floors,
Indoor and outdoor areas,
Reinforced concrete slabs,
Parking lots, warehouse floors,

Features

The strength of a concrete cured with PROCURE SB12 increases by 20-25% compared to normal concrete.
Prevents cracks that may occur during curing in concrete.
Reduces dusting on the concrete surface.
Since it is water based, it is non-flammable and easy to use.
It is more practical than other curing methods such as canvas, sacking, watering.

It does not constitute an obstacle for the coatings to be applied later on the applied surface.
It can be applied to increase the performance of the concrete on old concrete surfaces.

Consumption

Depending on the absorbency of the concrete surface and the ambient temperature;

0.060 – 0.100 lt / m² in brush, roller applications
0.100 – 0.120 lt / m² in spray applications

Technical Data

Material structure Acrylic resin
Appearance White liquid
Appearance after application Transparent
Density ~ 1 kg / liter
Flash point None, not flammable.
Drying time (20 °C) 1-2 hours (ASTM C309)
Standards ASTM C 309, Type 1

Application

No action is required on the concrete surface before PROCURE SB12 is applied. The application is made after the application of concrete and surface hardener, when the concrete surface has set enough to not be damaged – after the concrete surface water has evaporated, immediately after the removal of the molds, before the formation of the joints. In brush or roller applications, the concrete must set sufficiently in order not to damage the concrete surface. In spray applications, the material is sprayed on the surface in a thin layer of equal thickness. The material should be shaken well before use.

The drying time of the material after the curing application is 1-2 hours at 20o C. (ASTM C309) In later applications to be made on the cured concrete, the concrete surface should be cleaned of the curing agent. The material can be applied on old concrete as a performance enhancer.

Safety and Security

The material should not come into contact with the skin and eyes, and in case of contact, it should be washed with plenty of water. Gloves should be used during use.

Packaging and Storage

20-30 lt. canister, 200 lt. barrel.
It can be stored in the original drum or barrel, in a cool and protected place above +50 °C for at least 12 months.

What is Concrete Curing?

Concrete Curing is a process applied to extend the durability and life of concrete. Newly poured concrete enters the chemical hardening process under the influence of water. This process is closely related to the evaporation of water in the concrete or the humidity level of the external environment. Therefore, if sufficient concrete curing is not applied, the durability of the concrete may decrease and cracks may occur.

When answering the question of what is Concrete Curing, it is necessary to focus on the basic principles of this application. In order for the concrete to harden completely and reach the desired mechanical properties, a certain water/concrete ratio must be maintained. At this point, concrete curing materials must be selected correctly. Generally, water, curing gel or products with chemical additives are used.

The curing process aims to prevent water evaporation by covering the surface of the concrete. There are various concrete curing models that can be used during this process. For example, methods such as film-forming dipping, spraying or brushing can be applied. Thanks to these applications, a film layer is formed on the surface of the concrete and water loss is minimized.

Concrete curing should generally start immediately after the casting process. The initial hardening period of the concrete may vary depending on the ambient conditions. Therefore, the question of how long the concrete curing period should be should be determined according to the conditions of the project. In general, it should be maintained at least 70% moisture for the first 7 days. During this period, it is extremely important to regularly check the applied curing process and repeat it if necessary.

The Importance of Concrete Curing is essential for creating durable and long-lasting structures. Ignoring this process can negatively affect the quality and safety of projects. Therefore, effective concrete curing in building construction should be the primary goal of every engineer and master.

Areas of Use

On all vertical and horizontal concrete surfaces;

Industrial floors,
Indoor and outdoor areas,
Reinforced concrete slabs,
Parking lots, warehouse floors,

Features

It does not constitute an obstacle for the coatings to be applied later on the applied surface.
It can be applied to increase the performance of the concrete on old concrete surfaces.

Consumption

Depending on the absorbency of the concrete surface and the ambient temperature;

0.060 – 0.100 lt / m² in brush, roller applications
0.100 – 0.120 lt / m² in spray applications

Technical Data

Application

Safety and Security

The material should not come into contact with the skin and eyes, and in case of contact, it should be washed with plenty of water. Gloves should be used during use.

Packaging and Storage

20-30 lt. canister, 200 lt. barrel.
It can be stored in the original drum or barrel, in a cool and protected place above +50 °C for at least 12 months.

What is Concrete Curing?

Concrete Curing Time: How Long Should It Be?

Concrete curing time is an important factor that directly affects the durability and life of concrete. Freshly poured concrete should be kept in a suitable environment while it is hardening and drying. During this process, when the duration and application methods are adjusted correctly, the water circulation and temperature of the concrete can be controlled, which prevents cracking and other structural problems.

In general, the concrete curing time should be at least 7 days. However, this period may vary depending on environmental factors, the type of concrete and the materials used. For example, since there is a risk of the concrete drying quickly in hot weather, the curing period may need to be extended up to 14 days. In cold weather, the appropriate temperature should be provided to prevent the concrete from freezing and extension of the period should be considered.

Among the information on concrete curing, there is also the ideal time for the curing process to begin. It is recommended to start curing applications immediately after the concrete is poured, within the workability period (usually within the first 2-3 hours). This will prevent the surface of the concrete from cracking and hardening prematurely.

The methods used during the drying process are also important. Concrete curing is carried out by saturating with water, using damp covers or using special chemicals. Each of these methods can be supported by different concrete curing models. Special chemical products can be quite effective in preventing water loss by covering the concrete surface.

If the concrete is not cured properly within a sufficient period of time, major problems may be encountered in the future. Therefore, the importance of concrete curing should not be ignored. Incorrect or inadequate application weakens the durability of the structure and leads to additional costs. In this context, choosing the right period and methods will ensure the longevity of the projects.

Determining the correct concrete curing period and applying it appropriately increases the quality of the structures while helping to effectively control costs. Therefore, it is of great importance to have information about concrete curing periods and application methods in your concrete works.

Concrete Curing Application Methods

Concrete Curing application is a critical step in the construction sector to increase the quality of concrete and ensure its durability. This process is carried out to minimize water loss in newly poured concrete. The answer to the question of how to cure concrete is realized with many different approaches and methods. Here are some of these methods:

Growth with Water Method

Among the simplest and most common concrete curing application methods is providing moisture with water. In this method, the surface of the poured concrete is constantly kept wet. This prevents the upper surface of the concrete from drying out and reduces the evaporation of water in it. Generally, the surface of the concrete should be watered regularly for 7 to 14 days. The effectiveness of water application may vary depending on environmental conditions.

Covering with Covering Method

Another effective method is covering with covering. In this method, covers with special moisture retention capacity are laid on the concrete surface. These covers minimize water loss and also provide protection against external factors. Especially in windy and hot weather, the preference for this method frequently causes the question of what is concrete curing to be asked. The use of a cover actively supports the curing period of the concrete.

Chemical Curing Methods

The use of chemical curing is among another Concrete Curing application methods that have become popular recently. In this method, moisturizing is done with special liquids and materials that can be applied to the concrete surface. These chemicals protect the concrete, slow down the evaporation of water and increase the durability of the concrete. In terms of Concrete Curing prices, the use of chemical products is usually an economical and effective choice.

Low Heat and Moisture Removal Method

Curing concrete at low temperatures and high humidity is an issue that should be considered in terms of the importance of concrete curing. These environments are suitable for preventing cracks in the concrete, and it is necessary to control them carefully. The curing period of the concrete should be kept longer in such weather conditions.

Regular and careful application of Concrete Curing ensures the successful completion of construction projects and creates durable and long-lasting structures. Therefore, the selection of the methods mentioned above should be made according to the requirements of the project and environmental conditions. Choosing the appropriate one among each Concrete Curing model directly affects the quality of the concrete.

Information About Concrete Curing and Its Importance

Concrete Curing is a critical stage of a construction process. This process is indispensable for the durability and long life of concrete. First of all, it is necessary to answer the question of what is Concrete Curing: Concrete curing maintains the moisture of the newly poured concrete for a certain period of time, ensuring that the drying process is kept under control. This process prevents the loss of water in the concrete, increases its cracking and durability.